Netgear XCM8810 Chassis Hardware Installation Guide - Page 1247

NETGEAR 8800 Chassis Switch CLI Manual Syntax Description vlanname portlist Specifies a VLAN name. Specifies one or more ports or slots and ports. On a modular switch, it can be a list of slots and ports. On a stand-alone switch, it can be one or more port numbers. May be in the form 1, 2, 3-5, 2:5, 2:6-2:8. Default None. Usage Guidelines Use this command to remove the configuration that forwards all multicast groups to the specified VLAN ports. Example The following command removes a static MLD entry so all multicast groups are not forwarded to VLAN marketing on ports 2:1-2:4, unless an MLD join is received on the port: configure mld snooping marketing ports 2:1-2:4 delete static router configure mld snooping flood-list configure mld snooping flood-list [ | none] Description Configures certain multicast addresses to be slow path flooded within the VLAN. Syntax Description policy none Specifies a policy file with a list of multicast addresses to be handled. Specifies no policy file is to be used. Default None. Usage Guidelines With this command, a user can configure certain multicast addresses to be slow path flooded within the VLAN, instead of fast path forwarded according to MLD and/or Layer 3 multicast protocol. A policy file is a text file with the extension .pol. It can be created or edited with any text editor. The specified policy file should contain a list of addresses that Chapter 27. IPv6 Multicast Commands | 1247