Netgear XCM8810 Chassis Hardware Installation Guide - Page 1354

NETGEAR 8800 Chassis Switch CLI Manual Example NETGEAR 8800 series switch example The following command runs normal diagnostics on the I/O module installed in slot 2 of the NETGEAR 8800 series switch: run diagnostics normal slot 2 The switch displays a warning similar to the following about the impact of this test. You also have the opportunity to continue or cancel the test: Running Diagnostics will disrupt network traffic. Are you sure you want to continue? (y/n) Enter y to continue and run the diagnostics. Enter n to cancel the operation. save debug tracefiles memorycard save debug tracefiles memorycard Description Copies debug information to the external memory card. Syntax Description This command has no arguments or variables. Default N/A. Usage Guidelines Note: Use this command only under the guidance of NETGEAR Technical Support to troubleshoot the switch. Use this command to copy debug information to the specified memory card. The debug information includes log files and trace files. Progress messages are displayed that indicate the file being copied and when the copying is finished. You can use the upload debug [ | ] {{vr} } command to copy debug information to a network TFTP server. Example The following command copies debug information to the installed external memory card: 1354 | Appendix B. Troubleshooting Commands