Netgear XCM8810 Chassis Hardware Installation Guide - Page 308
disable inline-power legacy, disable inline-power legacy slot
View all Netgear XCM8810 Chassis manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 308 highlights
NETGEAR 8800 Chassis Switch CLI Manual disable inline-power disable inline-power legacy disable inline-power legacy Description Disables the non-standard (or capacitance) power detection mechanism for the switch. Syntax Description This command has no arguments or variables Default Disable. Usage Guidelines This command disables the non-standard power-detection mechanism on the switch. Legacy PDs do not conform to the IEEE 802.3af standard but may be detected by the switch through a capacitance measurement. However, measuring the power through capacitance is used only if this parameter is enabled and after an unsuccessful attempt to discover the PD using the standard resistance measurement method. The default for legacy is disabled. The reason legacy detection is configurable is that it is possible for a normal (non-PoE) device to have a capacitance signature that causes the device to be detected as a legacy PoE device and have power delivered to it, potentially causing damage to the device. Example The following command disables capacitance detection of PDs on the switch: disable inline-power legacy disable inline-power legacy slot disable inline-power legacy slot Description Disables the non-standard (or capacitance) power detection mechanism for the specified slot. Syntax Description slot Disables non-standard power detection for specified slot. 308 | Chapter 7. PoE Commands