Netgear XCM8810 Chassis Hardware Installation Guide - Page 868
enable ip-option record-route
View all Netgear XCM8810 Chassis manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 868 highlights
NETGEAR 8800 Chassis Switch CLI Manual The broadcast option prompts with a warning message when executed while the IP forwarding on the corresponding VLAN is disabled. The hardware and software are NOT programmed until IP forwarding is enabled on the VLAN. Example The following command enables forwarding of IP traffic for all VLANs in the current virtual router context with IP addresses: enable ipforwarding The following command enables forwarding of IP broadcast traffic for a VLAN named accounting: enable ipforwarding broadcast vlan accounting enable ip-option record-route enable ip-option record-route Description Enables processing of the record route IP option in the IPv4 packet header. Syntax Description This command has no arguments or variables. Default Enabled. Usage Guidelines IP option record-route (IP option 7) means that each router along the path should add it's IP address into the options data. Enabling means that the switch adds itself into the IP options header when the record route IP option is enabled in a packet that is transiting the switch. Example The following command enables processing of the record route IP option: enable ip-option record-route enable ip-option record-timestamp enable ip-option record-timestamp Description Enables processing of the record timestamp IP option in the IPv4 packet header. 868 | Chapter 19. IP Unicast Commands