Netgear XCM8810 Chassis Hardware Installation Guide - Page 802
con vrrp vlan vrid dont-preempt, con vrrp vlan vrid preempt
View all Netgear XCM8810 Chassis manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 802 highlights
NETGEAR 8800 Chassis Switch CLI Manual configure vrrp vlan vrid dont-preempt configure vrrp vlan vrid dont-preempt Description Specifies that a higher priority backup router does not preempt a lower priority master. Syntax Description vlan_name vridval Specifies the name of a VRRP VLAN. Specifies a VRRP Virtual Router ID (VRID). Value can be in the range of 1-255. Default The default setting is preempt. Usage Guidelines The preempt mode controls whether a higher priority backup router preempts a lower priority master. dont-preempt prohibits preemption. The router that owns the virtual IP address always preempts, independent of the setting of this parameter. Example The following command disallows preemption: configure vrrp vlan vlan-1 vrid 1 dont-preempt configure vrrp vlan vrid preempt configure vrrp vlan vrid preempt {delay } Description Specifies that a higher priority backup router preempts a lower priority master. Syntax Description vlan_name vridval seconds Specifies the name of a VRRP VLAN. Specifies a VRRP Virtual Router ID (VRID). Value can be in the range of 1-255. Specifies a preempt delay period in seconds. The value range is 1 to 3600 seconds, or 0, which selects the original preempt delay period. 802 | Chapter 18. VRRP Commands