Netgear XCM8810 Chassis Hardware Installation Guide - Page 788
show vlan stpd, con d with
View all Netgear XCM8810 Chassis manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 788 highlights
NETGEAR 8800 Chassis Switch CLI Manual Port State: BLOCKING Topology Change Ack: FALSE Port Priority: 16 Designated Root: 80:00:00:04:96:1f:a8:44 Designated Cost: 0, IntCost: 0 Designated Bridge: 80:00:00:04:96:1f:a8:44 Designated Port Id: 8002 Partner STP version: Dot1d Restricted Role: Enabled Edge Port Safe Guard: Disabled maxAge: 20 msgAge: 0 fwdDelay: 15 helloTime: 2 maxHops: 20 Participating Vlans: v1 The following command displays information for port 9 in STPD s1 configured with a bpdu-restrict recovery-timeout of 400: X250e-48p.1 # show s1 ports The following is sample output from this command: Port Mode State Cost Flags Priority Port ID Designated Bridge 9 EMISTP FORWARDING 20000 eDeepw-G-- 128 8009 80:00:00:04:96:1f:a8:48 Total Ports: 1 Flags 1: e=Enable, d=Disable 2: (Port role) R=Root, D=Designated, A=Alternate, B=Backup, M=Master 3: (Config type) b=broadcast, p=point-to-point, e=edge, a=auto 4: (Oper. type) b=broadcast, p=point-to-point, e=edge 5: p=proposing, a=agree 6: (partner mode) d = 802.1d, w = 802.1w, m = mstp 7: i = edgeport inconsistency 8: mstp 9: 10: S = edgeport safe guard active s = edgeport safe guard configured but inactive G = edgeport safe guard bpdu restrict active g = edgeport safe guard bpdu restrict configured but inactive only dot1w, B = Boundary, I = Internal r = Restricted Role show vlan stpd show vlan stpd Description Displays the STP configuration of the ports assigned to a specific VLAN. 788 | Chapter 17. STP Commands