Netgear XCM8810 Chassis Hardware Installation Guide - Page 414

NETGEAR 8800 Chassis Switch CLI Manual Usage Guidelines Depending on the software version running on your switch or your switch model, additional or different temperature information might be displayed. Use this command to display the temperature in Celsius and the current status of the following installed components in the switch: • Management modules (MSM/MM) • I/O modules • Power controllers The switch monitors the temperature of each component and generates a warning if the temperature exceeds the normal operating range. If the temperature exceeds the minimum/maximum limits, the switch shuts down the overheated module. Displaying the Temperature of Other Installed Components You can also view the temperature of the power supplies and the fan trays in the switch. To view the temperature of the power supplies installed in the switch, use the following command: show power {} {detail} Example Depending on the platform, the following command displays the temperature of various switch components: show temperature The following is sample output from a NETGEAR 8806 switch: XCM8806.8 # show temperature Field Replaceable Units Temp (C) Status Min Normal Max Slot-1 : XCM8824F 30.00 Normal -10 0-50 60 Slot-2 : Slot-3 : XCM888F 32.50 Normal -10 0-50 60 Slot-4 : Slot-5 : XCM8808X 37.00 Normal -10 0-50 60 Slot-6 : XCM8848T(P) 34.50 Normal -10 0-50 60 MSM-A : XCM88S1 37.50 Normal -10 0-50 60 MSM-B : PSUCTRL-1 : 38.38 Normal -10 0-50 60 PSUCTRL-2 : 42.40 Normal -10 0-50 60 (Demo)*XCM8806.9 # show version show version {detail | process | images {partition } {slot } } 414 | Chapter 8. Commands for Status Monitoring and Statistics