Netgear XCM8810 Chassis Hardware Installation Guide - Page 105

NETGEAR 8800 Chassis Switch CLI Manual Since you have chosen less secure management methods, please remember to increase the security of your network by taking the following actions: * change your admin password * change your SNMP public and private strings * consider using SNMPv3 to secure network management traffic In addition, you can return to safe defaults mode by issuing the following command: configure safe-default-script If you return to safe defaults mode, you must answer the questions presented during the interactive script. For more detailed information about safe defaults mode, see the section "Safe Defaults Setup Method" in the NETGEAR 8800 User Manual. Example The following command enables all SNMP access for the switch: enable snmp access enable snmp access vr enable snmp access vr [ | all] Description Selectively enables SNMP access on virtual routers. Syntax Description vr_name all Specifies the virtual router name. Specifies all virtual routers. Default Enabled on all virtual routers. Usage Guidelines Use this command to enable SNMP access on any or all virtual routers. To disable SNMP access on virtual routers, use the disable snmp access vr command. To display the SNMP configuration and statistics on a specified virtual router, use the show snmp vr_name command. Example The following command enables SNMP access on the virtual router vr-finance: Chapter 3. Commands for Managing the Switch | 105