Netgear XCM8810 Chassis Hardware Installation Guide - Page 93
con sntp-client update-interval
View all Netgear XCM8810 Chassis manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
NETGEAR 8800 Chassis Switch CLI Manual vr_name Specifies the name of a virtual router. Default N/A. Usage Guidelines Queries are first sent to the primary server. If the primary server does not respond within 1 second, or if it is not synchronized, the switch queries the second server. If the switch cannot obtain the time, it restarts the query process. Otherwise, the switch waits for the sntp-client update interval before querying again. Example The following command configures a primary NTP server: configure sntp-client primary 10.1.2.2 The following command configures the primary NTP server to use the management virtual router VR-Mgmt: configure sntp-client primary 10.1.2.2 vr VR-Mgmt configure sntp-client update-interval configure sntp-client update-interval Description Configures the interval between polls for time information from SNTP servers. Syntax Description update-interval Specifies an interval in seconds. Default 64 seconds. Usage Guidelines None. Example The following command configures the interval timer: configure sntp-client update-interval 30 Chapter 3. Commands for Managing the Switch | 93