Netgear XCM8810 Chassis Hardware Installation Guide - Page 981
disable ripng export
View all Netgear XCM8810 Chassis manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 981 highlights
NETGEAR 8800 Chassis Switch CLI Manual Syntax Description This command has no arguments or variables. Default Disabled. Usage Guidelines None. Example The following command disables RIPng for the whole router: disable ripng disable ripng export disable ripng export [direct | ospfv3 | ospfv3-extern1 | ospfv3-extern2 | ospfv3-inter | ospfv3-intra | static ] Description Disables RIPng from redistributing routes from other routing protocols. Syntax Description static direct ospfv3 ospfv3-intra ospfv3-inter ospfv3-extern1 ospfv3-extern2 Specifies user configured static routes. Specifies directly reachable subnets from the router (only interfaces that have IP forwarding enabled are exported). Specifies all OSPFv3 routes. Specifies OSPFv3-intra area routes. Specifies OSPFv3-inter area routes. Specifies OSPFv3 external route type 1. Specifies OSPFv3 external route type 2. Default Disabled. Usage Guidelines This command disables the exporting of static, direct, IS-IS, and OSPF-learned routes from the switch routing table into the RIPng domain. Chapter 22. RIPng Commands | 981