Netgear XCM8810 Chassis Hardware Installation Guide - Page 1290
show msdp peer, For detailed information for a specific peer, enter
View all Netgear XCM8810 Chassis manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1290 highlights
NETGEAR 8800 Chassis Switch CLI Manual show msdp mesh-group "msdp_mesh" The following is sample output from this command: Mesh Group Name Peers : msdp_mesh Num of Peers : 4 : 54.172.168.97 55.0.0.83 124.56.78.90 221.160.90.228 show msdp peer show msdp [peer {detail} | {peer} ] {vr } Description This command displays configuration and run-time parameters about MSDP peers. Syntax Description detail remoteaddr vrname Displays detailed information about MSDP peers. Specifies the IP address of the MSDP peer. Specifies the name of the virtual router to which this command applies. If a name is not specified, it is extracted from the current CLI context. Default N/A. Usage Guidelines Use this command to verify the configuration and run-time parameters for MSDP peers, as follows: • For summary information, enter the show msdp peer command. • For detailed information for all peers, enter the show msdp peer detail command. • For detailed information for a specific peer, enter the show msdp peer command. Example The following command displays configuration and run-time parameters for MSDP peers: show msdp peer The following is sample output from this command: Peer Address AS State Up/Down Resets SA_Cnt Name -d 54.172.168.97 14490 DISABLED 00:31:36 0 0 test *e 55.0.0.83 100 ESTABLISHED 00:21:04 1 0 to-Hawaii -d 124.56.78.90 2345 DISABLED 00:31:36 0 0 1290 | Chapter 28. MSDP Commands