Netgear XCM8810 Chassis Hardware Installation Guide - Page 75

NETGEAR 8800 Chassis Switch CLI Manual hex_user_name user_name sec-model snmpv1 snmpv2c usm volatile Specifies the user name to add or modify. The value to follow is to be supplies as a colon separated string of hex octets. Specifies the user name to add or modify in ASCII format. Specifies the security model to use. Specifies the SNMPv1 security model. Specifies the SNMPv2c security model. Specifies the SNMPv3 User-based Security Model (USM). Specifies volatile storage. Default The default values are: • sec-model-USM • non-volatile storage Usage Guidelines Use this command to associate a user name with a group. As per the SNMPv3 RFC, a security name is model independent while a username is model dependent. For simplicity, both are assumed to be same here. User names and security names are handled the same. In other words, if a user is created with the user name username, the security name value is the same, username. Every group is uniquely identified by a security name and security model. So the same security name can be associated to a group name but with different security models. Example The following command associates the user userV1 to the group defaultRoGroup with SNMPv1 security: configure snmpv3 add group defaultRoGroup user userV1 sec-model snmpv1 The following command associates the user userv3 with security model USM and storage type volatile to the access group defaultRoGroup: configure snmpv3 add group defaultRoGroup user userV3 volatile configure snmpv3 add mib-view configure snmpv3 add mib-view [[hex ] | ] subtree {/} {type [included | excluded]} {volatile} Description Adds (and modifies) a MIB view. Chapter 3. Commands for Managing the Switch | 75