Netgear XCM8810 Chassis Hardware Installation Guide - Page 767
con stpd ports restricted-role enable
View all Netgear XCM8810 Chassis manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 767 highlights
NETGEAR 8800 Chassis Switch CLI Manual Example The following command disables restricted role for s1 on port 6:3. configure stpd s1 ports restricted-role disable 6:3 configure stpd ports restricted-role enable configure stpd ports restricted-role enable Description Enables restricted role on the specified port inside the core network. Syntax Description stpd_name port_list Specifies an STPD name on the switch. Specifies one or more ports or slots and ports. Default NA Usage Guidelines Enabling restricted role causes the port not to be selected as a root port even if it has the best spanning tree priority vector. Such a port is selected as an alternate port after the root port has been selected. The restricted role is disabled by default. If set, it can cause a lack of spanning tree connectivity. A network administrator enables the restricted role to prevent bridges external to a core region of the network from influencing the spanning tree active topology, possibly because those bridges are not under the full control of the administrator. Note: Restricted role should not be enabled with edge mode. Note: Enabling Restricted Role at CIST is inherited by all MSTI. Example The following command enables restricted role on port 6:3. configure stpd s1 ports restricted-role enable 6:3 Chapter 17. STP Commands | 767