Netgear XCM8810 Chassis Hardware Installation Guide - Page 1213
timeout: 3 seconds, from: IP address of interface from which the mrinfo query is generated.
View all Netgear XCM8810 Chassis manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1213 highlights
NETGEAR 8800 Chassis Switch CLI Manual PIM-SM must also be configured on the interface for PIM to begin operating (which includes enabling IP multicast forwarding). IGMPv3 include messages for multicast addresses in the SSM range are only processed by PIM if PIM-SSM is enabled on the interface. Any non-IGMPv3 include messages in the SSM range are not processed by PIM on any switch interface, whether SSM is enabled or not. Example The following command enables PIM-SSM multicast routing on VLAN accounting: enable pim ssm vlan accounting mrinfo mrinfo {} {from } {timeout } {multiple-response-timeout } {vr } Description Requests information from a multicast router. Syntax Description router_address from_address seconds multi_resp_timeout vrname Specifies the unicast IP address of the router for which you want information. Specifies the unicast IP address of the interface where the mrinfo request is generated. Specifies a maximum time to wait for a response. The range is 1 to 30 seconds. Specifies a maximum time to wait for additional responses after the first response is received. The range is 0 to 3 seconds. Specifies a VR name. Default router_address: One of the local interface addresses. from: IP address of interface from which the mrinfo query is generated. timeout: 3 seconds multiple-response-timeout: 1 second vr: DefaultVR Usage Guidelines The last column of the mrinfo command output displays information in the following format: [Metric/threshold/type/flags] Chapter 26. IP Multicast Commands | 1213