Netgear XCM8810 Chassis Hardware Installation Guide - Page 397

NETGEAR 8800 Chassis Switch CLI Manual Strict Match Nbr - Neighbor, Rtr - Routerid Proc - Process Name : Y - every match parameter entered must be present in the event N - match parameters need not be present in the event show log configuration filter show log configuration filter {} Description Displays the log configuration for the specified filter. Syntax Description filter name Specifies the filter to display. Default If no options are specified, the command displays the configuration for all filters. Usage Guidelines This command displays the configuration for filters. Example The following command displays the configuration for the filter, myFilter: show log configuration filter myFilter The following is sample output from this command: Log Filter Name: myFilter I/ Severity E Comp. Sub-comp. Condition CEWNISVD I STP -------- I aaa -------- Include/Exclude: I - Include, E - Exclude Component Unreg: * - Component/Subcomponent is not currently registered Severity Values: C - Critical, E - Error, W - Warning, N - Notice, I - Info * - Pre-assigned severities in effect for specified component Debug Severity : S - Debug-Summary, V - Debug-Verbose, D - Debug-Data + - Debug Severities, but log debug-mode not enabled If Match parameters present: Parameter Flags: S - Source, D - Destination, (as applicable) I - Ingress, E - Egress, B - BGP Parameter Types: Port - Physical Port list, Slot - Physical Slot # Chapter 8. Commands for Status Monitoring and Statistics | 397