Netgear XCM8810 Chassis Hardware Installation Guide - Page 143

NETGEAR 8800 Chassis Switch CLI Manual TMask Timeout Retry Count Tag List Params Storage Type Row Status Storage Type Row Status : : 1500 : 0 : defaultNotify : v1v2cNotifyParam1 : NonVolatile : Active : NonVolatile : Active show snmpv3 target-params show snmpv3 target-params {[[hex ] | ]} Description Displays the information about the options associated with the parameter name. Syntax Description hex_target_params target_params Specifies the parameter to display. The value is to be supplied as a colon separated string of hex octets. Specifies the parameter name to display. The value is to be supplied in ASCII format. Default N/A. Usage Guidelines Use this command to display entries from the SNMPv3 snmpTargetParamsTable. This table specifies the message processing model, security level, security model, and the storage parameters for messages to any target addresses associated with a particular parameter name. If no parameter name is specified, all the entries are displayed. Example The following command displays the target parameter entry named P1: show snmpv3 target-params P1 The following is sample output from this command: Target Params Name MP Model Security Model User Name : p1 : snmpv2c : snmpv2c : testuser Chapter 3. Commands for Managing the Switch | 143