Netgear XCM8810 Chassis Hardware Installation Guide - Page 511
show access-list dynamic rule, The output of the command is similar to the following
View all Netgear XCM8810 Chassis manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 511 highlights
NETGEAR 8800 Chassis Switch CLI Manual Default The default is to display all interfaces, ingress. Usage Guidelines None. Example The following command displays all the dynamic ACL counters: show access-list dynamic counter show access-list dynamic rule show access-list dynamic rule {detail} Description Displays the syntax of a dynamic ACL. Syntax Description rule detail Specifies the rule to display. Specifies to display where the ACL has been applied. Default N/A. Usage Guidelines None. Example The following command displays the syntax of the dynamic ACL udpacl: show access-list dynamic rule updacl The output of the command is similar to the following: entry udpacl { if match all { source-address 10.203.134.0/24 ; destination-address 140.158.18.16/32 ; protocol udp ; source-port 190 ; destination-port 1200 - 1250 ; } then { Chapter 13. ACL Commands | 511