Netgear XCM8810 Chassis Hardware Installation Guide - Page 173

NETGEAR 8800 Chassis Switch CLI Manual The following command removes all of the core dump files stored on the internal memory card: rm internal-memory * If your switch has an external memory card installed, the following command removes the policy file named test.pol from the external memory card: rm memorycard test.pol If your switch has an external memory card installed, the following command removes all of the configuration files from the external memory card: rm memorycard *.cfg show cpu-monitoring show cpu-monitoring {process } {slot } Description Displays the CPU utilization history of one or more processes. Command Syntax name slotid Specifies the name of the process. Specifies the slot number of the MSM/MM module: • A specifies the MSM installed in slot A. • B specifies the MSM installed in slot B. Default N/A. Usage Guidelines Viewing statistics on a regular basis allows you to see how well your network is performing. If you keep simple daily records, you will see trends emerging and notice problems arising before they cause major network faults. This way, statistics can help you get the best out of your network. By default, CPU monitoring is enabled and occurs every 20 seconds. The default CPU threshold value is 60%. This information may be useful for your technical support representative if you experience a problem. Depending on the software version running on your switch or your switch model, additional or different CPU and process information might be displayed. When you issue the command without any parameters, the switch displays CPU utilization history for all of the processes running on the MSMs/MMs installed in your system. Chapter 4. Commands for Managing the NETGEAR 8800 Software | 173