Netgear XCM8810 Chassis Hardware Installation Guide - Page 40

NETGEAR 8800 Chassis Switch CLI Manual Example The following command disables clipaging and allows you to print continuously to the screen: disable clipaging disable idletimeout disable idletimeout Description Disables the timer that disconnects idle sessions from the switch. Syntax Description This command has no arguments or variables. Default Enabled. Timeout 20 minutes. Usage Guidelines When idle time-outs are disabled, console sessions remain open until the switch is rebooted or until you logoff. Telnet sessions remain open until you close the Telnet client. If you have an SSH2 session and disable the idle timer, the SSH2 connection times out after 61 minutes of inactivity. To view the status of idle time-outs on the switch, use the show management command. The show management command displays information about the switch including the enable/disable state for idle time-outs. Example The following command disables the timer that disconnects all sessions to the switch: disable idletimeout enable cli space-completion enable cli space-completion Description Enables the NETGEAR 8800 feature that completes a command automatically with the spacebar. You can also use the TAB key for auto-completion. Syntax Description This command has no arguments or variables. 40 | Chapter 2. Commands for Accessing the Switch