Netgear XCM8810 Chassis Hardware Installation Guide - Page 378

NETGEAR 8800 Chassis Switch CLI Manual disable sys-health-check slot 3 disable syslog disable syslog Description Disables logging to all remote syslog server targets. Syntax Description This command has no arguments or variables. Default Disabled. Usage Guidelines Disables logging to all remote syslog server targets, not to the switch targets. This setting is saved in FLASH, and will be in effect upon boot up. Example The following command disables logging to all remote syslog server targets: disable syslog enable cli-config-logging enable cli-config-logging Description Enables the logging of CLI configuration commands to the Syslog for auditing purposes. Syntax Description This command has no arguments or variables. Default Disabled. Usage Guidelines NETGEAR 8800 allows you to record all configuration changes and their sources that are made using the CLI by way of Telnet or the local console. The changes are logged to the system log. Each log entry includes the user account name that performed the changes and the source IP address of the client (if Telnet was used). Configuration logging applies only to commands that result in a configuration change. 378 | Chapter 8. Commands for Status Monitoring and Statistics