Netgear GS418TPP User Manual - Page 102
DHCP L2 Relay Interface Statistics
View all Netgear GS418TPP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
ProSAFE 8-Port or 16-Port Gigabit Smart Managed Switch Model GS418TPP, GS510TLP, and GS510TPP 7. From the Admin Mode menu, select to enable or disable the DHCP L2 relay on the selected interface. The default is Disable. 8. From the 82 Option Trust Mode menu, select to enable or disable an interface to be trusted for DHCP L2 Relay (Option-82) received. The default is Disable. 9. Click the Apply button. The updated configuration is sent to the switch. Configuration changes take effect immediately. DHCP L2 Relay Interface Statistics The DHCP L2 Relay Interface Statistics table shows information about the DHCP L2 relay interface. To view DHCP L2 relay interface statistics: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired connection to connect your computer to the network, or connect directly to a switch that is off-network using an Ethernet cable. 2. Launch a web browser. 3. In the address field of your web browser, enter the IP address of the switch. If you do not know the IP address of the switch, see Change the Default IP Address of the Switch on page 11. The login window opens. 4. Enter the switch's password in the Password field. The default password is password. The System Information page displays. 5. Select System> Services > DHCP L2 Relay > DHCP L2 Relay Interface Statistics. Configure System Information 102