Netgear GS418TPP User Manual - Page 300

ProSAFE 8-Port or 16-Port Gigabit Smart Managed Switch Model GS418TPP, GS510TLP, and GS510TPP  To configure HTTPS settings: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired connection to connect your computer to the network, or connect directly to a switch that is off-network using an Ethernet cable. 2. Launch a web browser. 3. In the address field of your web browser, enter the IP address of the switch. If you do not know the IP address of the switch, see Change the Default IP Address of the Switch on page 11. The login window opens. 4. Enter the switch's password in the Password field. The default password is password. The System Information page displays. 5. Select Security > Access > HTTPS > HTTPS Configuration. 6. Select the HTTPS Admin Mode Enable or Disable radio button. This enables or disables the administrative mode of secure HTTP (HTTPS). The configured value is displayed. The default value is Disable. You can download SSL certificates only when the HTTPS admin mode is disabled. HTTPS admin mode can be enabled only if a certificate is present on the device. 7. Select the SSL Version 3 Enable or Disable radio button. This enables or disables Secure Sockets Layer version 3.0. The configured value is displayed. The default value is Enable. 8. Select the TLS Version 1 Enable or Disable radio button. This enables or disables Transport Layer Security (TLS) version 1.0 and TLS version 1.2. The configured value is displayed. The default value is Enable. 9. In the HTTPS Port field, type the HTTPS port number. The value must be in the range of 1025 to 65535. Port 443 is the default value. The configured value is displayed. Manage Device Security 300