Netgear GS418TPP User Manual - Page 293

ProSAFE 8-Port or 16-Port Gigabit Smart Managed Switch Model GS418TPP, GS510TLP, and GS510TPP 9. In the Key String field, specify the authentication and encryption key for TACACS+ communications between the device and the TACACS+ server. The valid range is 0-128. The key must match the key used on the TACACS+ server. 10. In the Connection Timeout field, specify the time that passes before the connection between the device and the TACACS+ server times out. The range is 1-30. If you do not specify a value, the switch uses a default value of 5. 11. Click the Add button. The server is added to the switch. 12. Click the Apply button. The updated configuration is sent to the switch. Configuration changes take effect immediately. Authentication List Configuration You can configure a default login list. A login list specifies one or more authentication methods to validate switch or port access for the admin user. Note: The admin user is assigned to a preconfigured list that is named defaultList and that you cannot delete. Configure an HTTP Authentication List You can configure the default HTTP login list.  To change the HTTP authentication method for the default list: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired connection to connect your computer to the network, or connect directly to a switch that is off-network using an Ethernet cable. 2. Launch a web browser. 3. In the address field of your web browser, enter the IP address of the switch. If you do not know the IP address of the switch, see Change the Default IP Address of the Switch on page 11. The login window opens. 4. Enter the switch's password in the Password field. The default password is password. The System Information page displays. 5. Select Security > Management Security > Authentication List > HTTP Authentication List. Manage Device Security 293