Netgear GS418TPP User Manual - Page 189
Enable MLD Snooping, Password, Switching > Multicast > MLD Snooping > Configuration, Enable
View all Netgear GS418TPP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 189 highlights
ProSAFE 8-Port or 16-Port Gigabit Smart Managed Switch Model GS418TPP, GS510TLP, and GS510TPP Enable MLD Snooping You can enable MLD snooping, which is used to build forwarding lists for multicast traffic. To enable MLD snooping: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired connection to connect your computer to the network, or connect directly to a switch that is off-network using an Ethernet cable. 2. Launch a web browser. 3. In the address field of your web browser, enter the IP address of the switch. If you do not know the IP address of the switch, see Change the Default IP Address of the Switch on page 11. The login window opens. 4. Enter the switch's password in the Password field. The default password is password. The System Information page displays. 5. Select Switching> Multicast > MLD Snooping > Configuration. 6. Select the MLD Snooping Admin Mode Enable radio button. By default, the Disable radio button is selected. 7. Click the Apply button. The updated configuration is sent to the switch. Configuration changes take effect immediately. 8. To refresh the page with the latest information about the switch, click the Update button. Configure Switching 189