Netgear GS418TPP User Manual - Page 74

ProSAFE 8-Port or 16-Port Gigabit Smart Managed Switch Model GS418TPP, GS510TLP, and GS510TPP Table 22. Green Ethernet Statistics Summary information (continued) Field Description Energy Detect Operational Status Current operational status of the Energy Detect mode. EEE Admin mode Enable or disable Energy Efficient Ethernet mode on the port. With EEE mode enabled, the port transitions to low power mode during link idle conditions. Configure the Green Ethernet EEE LPI History You can configure and view the Green Ethernet low power idle (LPI) history.  To configure the port Green Ethernet EEE LPI history: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired connection to connect your computer to the network, or connect directly to a switch that is off-network using an Ethernet cable. 2. Launch a web browser. 3. In the address field of your web browser, enter the IP address of the switch. If you do not know the IP address of the switch, see Change the Default IP Address of the Switch on page 11. The login window opens. 4. Enter the switch's password in the Password field. The default password is password. The System Information page displays. 5. Select System > Management > Green Ethernet > Green Ethernet LPI History. 6. Select the interface. 7. In the Sampling Interval field, enter the interval at which EEE LPI data is collected. This is a global setting and is applied to all interfaces. The range is 30 to 36000.The default value is 3600. Configure System Information 74