Netgear GS418TPP User Manual - Page 160

ProSAFE 8-Port or 16-Port Gigabit Smart Managed Switch Model GS418TPP, GS510TLP, and GS510TPP • Configuration Revision Level. Specify an identifier used to identify the configuration currently being used. The values allowed are between 0 and 65535. The default value is 0. • Forward BPDU while STP Disabled. Enable or disable the BPDU Flood. This specifies whether spanning tree BPDUs are forwarded or not while spanning tree is disabled on the switch. 7. Click the Apply button. The updated configuration is sent to the switch. Configuration changes take effect immediately. The following table describes the nonconfigurable STP Status fields displayed on the page. Table 37. STP configuration status Field Configuration Digest Key STP Status Bridge Identifier Time Since Topology Change Topology Change Count Topology Change Designated Root Root Path Cost Root Port Max Age (secs) Forward Delay (secs) Hold Time (secs) CST Regional Root CST Path Cost Description Identifier used to identify the configuration currently being used. The bridge identifier for the CST. It is made up using the bridge priority and the base MAC address of the bridge. The time in day-hour-minute-second format since the topology of the CST last changed. The number of times that the topology changed for the CST. The value of the topology change parameter for the switch indicating whether a topology change is in progress on any port assigned to the CST. Possible values are True and False. The bridge identifier of the root bridge. It is made up from the bridge priority and the base MAC address of the bridge. Path cost to the designated root for the CST. Port to access the designated root for the CST. The maximum age timer controls the maximum length of time in seconds that passes before a bridge port saves its configuration BPDU information. The derived value of the Root Port Bridge Forward Delay parameter. Minimum time in seconds between the transmission of configuration BPDUs. Priority and base MAC address of the CST regional root. Path cost to the CST tree regional root. Configure Switching 160