Netgear GS418TPP User Manual - Page 259

ProSAFE 8-Port or 16-Port Gigabit Smart Managed Switch Model GS418TPP, GS510TLP, and GS510TPP 6. Select the administrative mode for DiffServ: • Enable. Differentiated services are active. This is the default setting. • Disable. The DiffServ configuration is retained and can be changed but is not active. 7. Click the Apply button. The updated configuration is sent to the switch. Configuration changes take effect immediately. The following table describes the information displayed in the Status table on the DiffServ Configuration page. Table 69. DiffServ Status information Field Class Table Class Rule table Policy table Policy Instance table Policy Attributes table Service table Description The number of configured DiffServ classes out of the total allowed on the switch. The number of configured class rules out of the total allowed on the switch. The number of configured policies out of the total allowed on the switch. The number of configured policy class instances out of the total allowed on the switch. The number of configured policy attributes (attached to the policy class instances) out of the total allowed on the switch. The number of configured services (attached to the policies on specified interfaces) out of the total allowed on the switch. Configure a DiffServ Class You can add a new DiffServ class name, or rename or delete an existing class. You can also define the criteria to associate with a DiffServ class. As packets are received, these DiffServ classes are used to prioritize packets. You can set up multiple match criteria in a class. The logic is a Boolean logical AND for this criteria. After creating a class, click the class link to the Class page. Configure Quality of Service 259