Netgear GS418TPP User Manual - Page 153
Con Auto-VoIP OUI-Based Properties, Switching > Auto-VoIP > OUI-based > Properties
View all Netgear GS418TPP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 153 highlights
ProSAFE 8-Port or 16-Port Gigabit Smart Managed Switch Model GS418TPP, GS510TLP, and GS510TPP Configure Auto-VoIP OUI-Based Properties With Organizationally Unique Identifier (OUI)-based Auto-VoIP, voice prioritization is provided based on OUI bits. To configure Auto-VoIP OUI-based properties: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired connection to connect your computer to the network, or connect directly to a switch that is off-network using an Ethernet cable. 2. Launch a web browser. 3. In the address field of your web browser, enter the IP address of the switch. If you do not know the IP address of the switch, see Change the Default IP Address of the Switch on page 11. The login window opens. 4. Enter the switch's password in the Password field. The default password is password. The System Information page displays. 5. Select Switching > Auto-VoIP > OUI-based > Properties. 6. In the Auto-VoIP VLAN ID field, enter the VoIP VLAN ID of the switch. No default VLAN exists for Auto-VoIP, you must create a VLAN for Auto-VoIP. 7. From the OUI-based priority menu, select the OUI-based priority of the switch. The default value is 7. 8. Click the Apply button. The updated configuration is sent to the switch. Configuration changes take effect immediately. Configure Switching 153