Netgear GS418TPP User Manual - Page 284
Con a RADIUS Authentication Server on the Switch
View all Netgear GS418TPP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 284 highlights
ProSAFE 8-Port or 16-Port Gigabit Smart Managed Switch Model GS418TPP, GS510TLP, and GS510TPP 8. From he Accounting Mode menu, select to disable or enable RADIUS accounting on the server. The default is Disabled. 9. Click the Apply button. The updated configuration is sent to the switch. Configuration changes take effect immediately. The following table describes the nonconfigurable fields displayed on the page. Table 75. RADIUS Configuration information Field Current Server Address Number of Configured Authentication Servers Description The address of the current server. This field is blank if no servers are configured. The number of configured authentication RADIUS servers. The value can range from 0 to 32. Configure a RADIUS Authentication Server on the Switch You view and configure various settings for a RADIUS server configured on the switch. Add a Primary RADIUS Authentication Server to the Switch To add a primary RADIUS authentication server to the switch and view the RADIUS authentication server statistics: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired connection to connect your computer to the network, or connect directly to a switch that is off-network using an Ethernet cable. 2. Launch a web browser. 3. In the address field of your web browser, enter the IP address of the switch. If you do not know the IP address of the switch, see Change the Default IP Address of the Switch on page 11. The login window opens. 4. Enter the switch's password in the Password field. The default password is password. The System Information page displays. 5. Select Security > Management Security > RADIUS > Server Configuration. Manage Device Security 284