Netgear GS418TPP User Manual - Page 138

ProSAFE 8-Port or 16-Port Gigabit Smart Managed Switch Model GS418TPP, GS510TLP, and GS510TPP The System Information page displays. 5. Select Switching > VLAN > Advanced > VLAN Membership. 6. In the VLAN ID menu, select the VLAN ID. 7. In the Group Operation menu, select one of the following options, which applies to all ports in the VLAN: • Untag All. For all ports that are members of the VLAN, tags are removed from all egress packets. • Tag All. For all ports that are members of the VLAN, all egress packets are tagged. • Remove All. All ports that were dynamically registered through GVRP are removed from the VLAN. 8. In the Ports table, click each port once, twice, or three times to configure one of the following modes or reset the port to the default settings: • T (Tagged). Select the ports on which all frames transmitted for this VLAN are tagged. The ports that are selected are included in the VLAN. • U (Untagged). Select the ports on which all frames transmitted for this VLAN are untagged. The ports that are selected are included in the VLAN. By default, the selection is blank, which means that the port is excluded from the VLAN but can be dynamically registered (autodetected) in the VLAN through GVRP. 9. In the LAG table, click each LAG once, twice, or three times to configure one of the following modes or reset the LAG to the default settings: • T (Tagged). Select the LAGs on which all frames transmitted for this VLAN are tagged. The LAGs that are selected are included in the VLAN. • U (Untagged). Select the LAGs on which all frames transmitted for this VLAN are untagged. The LAGs that are selected are included in the VLAN. By default, the selection is blank, which means that the LAG is excluded from the VLAN but can be dynamically registered (autodetected) in the VLAN through GVRP. Configure Switching 138