Netgear GS418TPP User Manual - Page 188

ProSAFE 8-Port or 16-Port Gigabit Smart Managed Switch Model GS418TPP, GS510TLP, and GS510TPP If you do not know the IP address of the switch, see Change the Default IP Address of the Switch on page 11. The login window opens. 4. Enter the switch's password in the Password field. The default password is password. The System Information page displays. 5. Select Switching> Multicast > IGMP Snooping Querier > Querier VLAN Status. The following table describes the nonconfigurable information displayed on the page. Table 49. Querier VLAN Status information Field Description VLAN ID The VLAN ID on which IGMP snooping querier is administratively enabled and the VLAN exists in the VLAN database. Operational State The operational state of the IGMP snooping querier on a VLAN. It can be in any of the following states: • Querier. The snooping switch is the querier in the VLAN. The snooping switch sends out periodic queries with a time interval equal to the configured querier query interval. If the snooping switch finds a better querier in the VLAN, it moves to non-querier mode. • Non-Querier. The snooping switch is in non-querier mode in the VLAN. If the querier expiry interval timer expires, the snooping switch moves into querier mode. • Disabled. The snooping querier is not operational on the VLAN. The snooping querier moves to disabled mode when IGMP snooping is not operational on the VLAN or when the querier address is not configured or the network management address is also not configured. Operational Version The operational IGMP protocol version of the querier. Last Querier Address The IP address of the last querier from which a query was snooped on the VLAN. Last Querier Version The IGMP protocol version of the last querier from which a query was snooped on the VLAN. Operational Max Response Time The maximum response time to be used in the queries that are sent by the snooping querier. Configure Switching 188