Netgear GS418TPP User Manual - Page 190

ProSAFE 8-Port or 16-Port Gigabit Smart Managed Switch Model GS418TPP, GS510TLP, and GS510TPP The following table describes the nonconfigurable MLD Snooping Configuration fields. Table 50. MLD Snooping Configuration information Field Multicast Control Frame Count Interfaces Enabled for MLD Snooping VLAN IDs Enabled For MLD Snooping Definition The number of multicast control frames that were processed by the CPU. The interfaces on which MLD snooping is administratively enabled. MLD snooping must be enabled globally and on an interface for the interface to be able to snoop MLD packets to determine which segments must receive multicast packets directed to the group address. The VLANs on which MLD snooping is administratively enabled. Configure a MLD Snooping Interface  To configure a MLD snooping interface: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired connection to connect your computer to the network, or connect directly to a switch that is off-network using an Ethernet cable. 2. Launch a web browser. 3. In the address field of your web browser, enter the IP address of the switch. If you do not know the IP address of the switch, see Change the Default IP Address of the Switch on page 11. The login window opens. 4. Enter the switch's password in the Password field. The default password is password. The System Information page displays. 5. Select Switching> Multicast > MLD Snooping > Interface Configuration. 6. Select one or more interfaces by taking one of the following actions: • To configure a single interface, select the check box associated with the port, or type the port number in the Go To Interface field and click the Go button. Configure Switching 190