Netgear GS418TPP User Manual - Page 186

ProSAFE 8-Port or 16-Port Gigabit Smart Managed Switch Model GS418TPP, GS510TLP, and GS510TPP The login window opens. 4. Enter the switch's password in the Password field. The default password is password. The System Information page displays. 5. Select Switching> Multicast > IGMP Snooping Querier > Querier Configuration. 6. Configure the following settings: • Querier Admin Mode. Enable or disable IGMP snooping for the switch. The default is Disable. • Snooping Querier IP Address. Enter the snooping querier IP address to be used as the source address in periodic IGMP queries. This address is used when no address is configured on the VLAN on which a query is being sent. • IGMP Version. Specify the IGMP protocol version used in periodic IGMP queries. The range is 1 to 2. The default value is 2. • Query Interval(secs). Specify the time interval in seconds between periodic queries sent by the snooping querier. The query interval must be a value in the range of 1 and 1800. The default value is 60. • Querier Expiry Interval(secs). Specify the time interval in seconds after which the last querier information is removed. The querier expiry Interval must be a value in the range of 60 and 300. The default value is 125. 7. Click the Apply button. The updated configuration is sent to the switch. Configuration changes take effect immediately. Configure IGMP Snooping Querier for VLANs You can configure IGMP queriers for use with VLANs on the network.  To create a new VLAN ID for IGMP snooping: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired connection to connect your computer to the network, or connect directly to a switch that is off-network using an Ethernet cable. 2. Launch a web browser. Configure Switching 186