Netgear GS418TPP User Manual - Page 269

ProSAFE 8-Port or 16-Port Gigabit Smart Managed Switch Model GS418TPP, GS510TLP, and GS510TPP The default password is password. The System Information page displays. 5. Select QoS > DiffServ > Advanced > IPv6 Class Configuration. The Class Name page displays. 6. Select the check box next to the class name. 7. In the Class Name field, specify the new name. 8. Click the Apply button. The updated configuration is sent to the switch. Configuration changes take effect immediately. Change the Criteria for an Existing IPv6 DiffServ Class  To change the criteria for an existing IPv6 DiffServ class: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired connection to connect your computer to the network, or connect directly to a switch that is off-network using an Ethernet cable. 2. Launch a web browser. 3. In the address field of your web browser, enter the IP address of the switch. If you do not know the IP address of the switch, see Change the Default IP Address of the Switch on page 11. The login window opens. 4. Enter the switch's password in the Password field. The default password is password. The System Information page displays. 5. Select QoS > DiffServ > Advanced > IPv6 Class Configuration. The Class Name page displays. 6. Click the class name, which is a hyperlink. The page on which you can change the class configuration displays. 7. Change the class configuration as needed. 8. Click the Apply button. The updated configuration is sent to the switch. Configuration changes take effect immediately. Delete an IPv6 DiffServ Class  To delete an IPv6 DiffServ class: 1. Connect your computer to the same network as the switch. Configure Quality of Service 269