Netgear GS418TPP User Manual - Page 192
Switching > Multicast > MLD Snooping > MLD VLAN Configuration, Multicast Router Expiry Time
View all Netgear GS418TPP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 192 highlights
ProSAFE 8-Port or 16-Port Gigabit Smart Managed Switch Model GS418TPP, GS510TLP, and GS510TPP If you do not know the IP address of the switch, see Change the Default IP Address of the Switch on page 11. The login window opens. 4. Enter the switch's password in the Password field. The default password is password. The System Information page displays. 5. Select Switching> Multicast > MLD Snooping > MLD VLAN Configuration. 6. In the VLAN ID field, specify the VLAN IDs for which MLD snooping is enabled. 7. From the Fast Leave menu, select to enable or disable the MLD snooping Fast Leave mode for the specified VLAN ID. 8. In the Membership Interval field, set the value for the group membership interval of MLD snooping for the specified VLAN ID. The valid range is Maximum Response Time + 1 to 3600. 9. In the Maximum Response Time field, set the value for the maximum response time of MLD snooping for the specified VLAN ID. The valid range is 1 to Group Membership Interval -1. This value must be less than the group membership interval value. 10. In the Multicast Router Expiry Time field, set the value for the multicast router expiry time of MLD snooping for the specified VLAN ID. The valid range is 0 to 3600. 11. Click the Add button. MLD snooping is enabled on the specified VLAN. 12. Click the Apply button. The updated configuration is sent to the switch. Configuration changes take effect immediately. Configure Switching 192