Netgear GS418TPP User Manual - Page 391

ProSAFE 8-Port or 16-Port Gigabit Smart Managed Switch Model GS418TPP, GS510TLP, and GS510TPP 3. In the address field of your web browser, enter the IP address of the switch. If you do not know the IP address of the switch, see Change the Default IP Address of the Switch on page 11. The login window opens. 4. Enter the switch's password in the Password field. The default password is password. The System Information page displays. 5. Select Monitoring > Logs > FLASH Log. The FLASH Log Configuration page displays. 6. Select one of the following Admin Status radio buttons: • Enable. A log that is enabled logs messages. • Disable. A log that is disabled does not log messages. 7. From the Severity Filter menu, select the logging level for messages that must be sent to the logging host. Log messages with the selected severity level and all log messages of greater severity are sent to the host. For example, if you select Error, the logged messages include Error, Critical, Alert, and Emergency. The default severity level is Alert (1). The severity can be one of the following levels: - Emergency (0). The highest warning level. If the device is down, or not functioning properly, an emergency log message is saved to the device. - Alert (1). The second-highest warning level. An alert log message is saved if a serious device malfunction occurs, such as all device features being down. Action must be taken immediately. - Critical (2). The third-highest warning level. A critical log message is saved if a critical device malfunction occurs, for example, two device ports are not functioning, while the rest of the device ports remain functional. - Error (3). A device error occurred, such as a port being offline. - Warning (4). The lowest level of a device warning. - Notice (5). Normal but significant conditions. Provides the network administrators with device information. - Informational (6). Provides device information. - Debug (7). Provides detailed information about the device. 8. From the Logs to be Displayed menu, select one of the following options: • Current Logs. The log messages for the current switch sessions are displayed. This is the default setting. • Previous Logs. The previous log messages are displayed, that is, the log messages that are still in the flash memory from before the switch was rebooted. 9. Click the Apply button. Monitor the System 391