Netgear GS418TPP User Manual - Page 210

ProSAFE 8-Port or 16-Port Gigabit Smart Managed Switch Model GS418TPP, GS510TLP, and GS510TPP 8. From the Keep Alive menu, select Enable or Disable to specify whether keep-alives are enabled on an interface. The default is Disable. 9. From the RX Action menu, select the action that occurs when the switch detects a loop on an interface: • Log. The switch logs a message. • Disable. The switch disables the interface. This is the default action. • Both. The switch both logs a message and disables the interface. 10. Click the Apply button. The updated configuration is sent to the switch. Configuration changes take effect immediately. 11. Click the Clear button to clear all the statistics in the table. 12. Click the Update button to update the page to show the latest information. The following table describes the nonconfigurable information displayed on the page. Table 56. L2 Loop Protection Interface Information Field Loop Detected Loop Count Time Since Last Loop Port Status Description Shows whether a loop is detected on the interface. If the interface is disabled and then reenabled, the status changes to No again. The number of packets that were received after the loop was detected. The time that elapsed since the loop was detected. The status of the interface (Enabled, Disabled, or D-Disabled, which stands for diagnostically disabled). Configure Switching 210