Netgear GS418TPP User Manual - Page 139
View VLAN Status, Apply, To view the VLAN status, Password
View all Netgear GS418TPP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 139 highlights
ProSAFE 8-Port or 16-Port Gigabit Smart Managed Switch Model GS418TPP, GS510TLP, and GS510TPP 10. Click the Apply button. The updated configuration is sent to the switch. Configuration changes take effect immediately. The following table describes the nonconfigurable information displayed on the page. Table 32. Advanced VLAN membership Field VLAN Name VLAN Type Definition The name for the VLAN that you selected. It can be up to 32 alphanumeric characters long, including blanks. VLAN ID 1 always uses the name Default. The type of the VLAN you selected: • Default (VLAN ID = 1). Always present. • Static. A VLAN that you configured. • Dynamic. A VLAN created by GVRP registration that you did not convert to static, and that GVRP can therefore remove. View VLAN Status You can view the status of all currently configured VLANs. To view the VLAN status: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired connection to connect your computer to the network, or connect directly to a switch that is off-network using an Ethernet cable. 2. Launch a web browser. 3. In the address field of your web browser, enter the IP address of the switch. If you do not know the IP address of the switch, see Change the Default IP Address of the Switch on page 11. The login window opens. 4. Enter the switch's password in the Password field. The default password is password. The System Information page displays. 5. Select Switching > VLAN > Advanced > VLAN Status. Configure Switching 139