Netgear GS418TPP User Manual - Page 369

ProSAFE 8-Port or 16-Port Gigabit Smart Managed Switch Model GS418TPP, GS510TLP, and GS510TPP 8. To add the selected ACL to a port or LAG, in the Ports table or LAG table, click the port or LAG so that a check mark displays. You can add the ACL to several ports and LAGs. The Ports and LAG tables display the available and valid interfaces for ACL binding. All nonrouting physical interfaces, VLAN interfaces, and interfaces participating in LAGs are listed. 9. Click the Apply button. The updated configuration is sent to the switch. Configuration changes take effect immediately. The following table describes the nonconfigurable information displayed on the page. Table 88. IP Binding Status table Field Interface Direction ACL Type ACL ID/Name Sequence Number Description The selected interface. The selected packet filtering direction for the ACL. The type of ACL assigned to the selected interface and direction. The ACL number (for an IP ACL) or ACL name (for a named IP ACL or IPv6 ACL) identifying the ACL assigned to the selected interface and direction. The sequence number signifying the order of specified ACL relative to other ACLs assigned to the selected interface and direction. View or Delete IP ACL Bindings in the IP ACL Binding Table You can view or delete IP ACL bindings.  To view or delete IP ACL bindings: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired connection to connect your computer to the network, or connect directly to a switch that is off-network using an Ethernet cable. 2. Launch a web browser. 3. In the address field of your web browser, enter the IP address of the switch. If you do not know the IP address of the switch, see Change the Default IP Address of the Switch on page 11. The login window opens. 4. Enter the switch's password in the Password field. The default password is password. The System Information page displays. Manage Device Security 369