Netgear GS418TPP User Manual - Page 136

ProSAFE 8-Port or 16-Port Gigabit Smart Managed Switch Model GS418TPP, GS510TLP, and GS510TPP The updated configuration is sent to the switch. Configuration changes take effect immediately. Delete a VLAN  To delete a VLAN from the switch: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired connection to connect your computer to the network, or connect directly to a switch that is off-network using an Ethernet cable. 2. Launch a web browser. 3. In the address field of your web browser, enter the IP address of the switch. If you do not know the IP address of the switch, see Change the Default IP Address of the Switch on page 11. The login window opens. 4. Enter the switch's password in the Password field. The default password is password. The System Information page displays. 5. Select Switching> VLAN > Basic > VLAN Configuration. The VLAN Configuration page displays. 6. In the VLAN ID field, specify the VLAN identifier. The range of the VLAN ID can be from 1 to 4093. Note: You cannot delete VLANs 1 and VLAN 4089, which are created by default. 7. Click the Delete button. The VLAN is removed. Reset a VLAN to Its Default Settings  To reset a VLAN to its default settings: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired connection to connect your computer to the network, or connect directly to a switch that is off-network using an Ethernet cable. 2. Launch a web browser. 3. In the address field of your web browser, enter the IP address of the switch. Configure Switching 136