Netgear GS418TPP User Manual - Page 272

ProSAFE 8-Port or 16-Port Gigabit Smart Managed Switch Model GS418TPP, GS510TLP, and GS510TPP • Mark VLAN CoS. Select this radio button to specify the VLAN priority, which you must select from the menu. The VLAN priority is expressed as an integer value in the range from 0 to 7. • Mark IP Precedence. Select this radio button to require packets to be marked with an IP precedence value before being forwarded. You must select an IP precedence value from 0 to 7 from the menu. • Mirror. Select this radio button to require packets to be mirrored to an interface or LAG, one of which you must select from the menu. • Redirect. Select this radio button to require packets to be redirected to an interface or LAG, one of which you must select from the menu. • Mark IP DSCP. Select this radio button to require packet to be marked with an IP DSCP keyword code, which you must select from the menu. The menu includes Other as a selection, which lets you enter an IP DSCP value from 0 to 63. The DSCP value is defined as the high-order 6 bits of the Service Type octet in the IP header. • Simple Policy. Select this radio button to define the traffic policing style for the class. A simple policy uses a single data rate and burst size, resulting in one of two outcomes: conform or violate. You must define the policy as described in the next step. 12. If you select the Simple Policy radio button, you can specify the traffic policing style for the class: • Color Mode. From the menu, select one of the following options: - Color Blind. This is the default selection. Color classes do not apply. - Color Aware. Requires you to select a color class that is valid for use with this policy instance. After you select Color Aware from the Color Mode menu, the Color Conform Class menu displays. From this menu you must select a color class that you already created (see Configure a DiffServ Class on page 259) and selected as a member class for this policy instance (see Step 7). Note: A valid color class contains a single, non-excluded match criterion for the CoS, IP DSCP, or IP Precedence option. The configured option must not conflict with the classifier of the policy instance itself. • Committed Rate. Enter the committed rate that is applied to conforming packets by specifying a value in the range from 1 to 4294967295 Kbps. • Committed Burst Size. Enter the committed burst size that is applied to conforming packets by specifying a value in the range from 1 to 128 Kbps. 13. Select the conforming and violating actions. The Conform Action section and Violate Action section list the actions to be taken on conforming packets according to the policing metrics. By default, both conforming packets and violating packets are sent. In both the Conform Action section and the Violate Action section, select one of the following actions: Configure Quality of Service 272