Netgear GS418TPP User Manual - Page 274

ProSAFE 8-Port or 16-Port Gigabit Smart Managed Switch Model GS418TPP, GS510TLP, and GS510TPP The System Information page displays. 5. Select QoS > DiffServ > Advanced > Policy Configuration. The Policy Configuration page displays. 6. Select the check box next to the policy name. 7. In the Policy Name field, specify the new name. 8. Click the Apply button. The updated configuration is sent to the switch. Configuration changes take effect immediately. Change the Policy Attributes for an Existing DiffServ Policy  To change the policy attributes for an existing DiffServ policy: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired connection to connect your computer to the network, or connect directly to a switch that is off-network using an Ethernet cable. 2. Launch a web browser. 3. In the address field of your web browser, enter the IP address of the switch. If you do not know the IP address of the switch, see Change the Default IP Address of the Switch on page 11. The login window opens. 4. Enter the switch's password in the Password field. The default password is password. The System Information page displays. 5. Select QoS > DiffServ > Advanced > Policy Configuration. The Policy Configuration page displays. 6. Click the policy name, which is a hyperlink. The page on which you can change the policy attributes displays. 7. Change the policy attributes as needed. 8. Click the Apply button. The updated configuration is sent to the switch. Configuration changes take effect immediately. Remove a Class From an Existing DiffServ Policy  To remove a class from an existing DiffServ policy: 1. Connect your computer to the same network as the switch. Configure Quality of Service 274