Netgear GS418TPP User Manual - Page 219

ProSAFE 8-Port or 16-Port Gigabit Smart Managed Switch Model GS418TPP, GS510TLP, and GS510TPP 7. To refresh the page with the latest information about the switch, click the Update button. The following table describes the nonconfigurable data that is displayed. Table 59. IPv6 Route Table information Field Number of Routes IPv6 Prefix Prefix Length Protocol Next Hop Interface Next Hop IP Address Preference Description The total number of active routes in the route table. The network prefix for the active route. The prefix length for the active route. The type of protocol for the active route. The interface over which the route is active. For a reject route, the next hop would be a Null0 interface. The next hop IPv6 address for the active route. The route preference of the configured route. Configure IPv6 VLAN Interface Settings  Configure IPv6 VLAN interface settings: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired connection to connect your computer to the network, or connect directly to a switch that is off-network using an Ethernet cable. 2. Launch a web browser. 3. In the address field of your web browser, enter the IP address of the switch. If you do not know the IP address of the switch, see Change the Default IP Address of the Switch on page 11. The login window opens. 4. Enter the switch's password in the Password field. The default password is password. The System Information page displays. 5. Select Routing> IPv6 > Advanced > VLAN Configuration. Configure Routing 219