Netgear GS418TPP User Manual - Page 340
Destination MAC Mask
View all Netgear GS418TPP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 340 highlights
ProSAFE 8-Port or 16-Port Gigabit Smart Managed Switch Model GS418TPP, GS510TLP, and GS510TPP 8. From the Action menu, select the action that must be taken if a packet matches the rule's criteria: • Permit. Forwards packets that meet the ACL criteria. • Deny. Drops packets that meet the ACL criteria. 9. In the Assign Queue field, specify the hardware egress queue identifier that must be used to handle all packets matching this ACL rule. The valid range of queue IDs is 0 to 7. 10. From the Mirror Interface menu, select the specific egress interface to which the matching traffic stream must be copied, in addition to being forwarded normally by the switch. This field cannot be set if a redirect interface is already configured for the ACL rule. This field is visible for a Permit action. 11. From the Redirect Interface menu, select the egress interface to which the matching traffic stream must be redirected, bypassing any forwarding decision normally performed by the switch. This field cannot be set if a mirror interface is already configured for the ACL rule. 12. From the Match Every menu, select whether each Layer 2 MAC packet must be matched against the rule: • True. Each packet must match the selected ACL rule. • False. Not all packets need to match the selected ACL rule. 13. In the CoS field, specify the 802.1p user priority that must be compared against the information in an Ethernet frame. The valid range of values is 0 to 7. 14. In the Destination MAC field, specify the destination MAC address that must be compared against the information in an Ethernet frame. The valid format is xx:xx:xx:xx:xx:xx. The BPDU keyword can be specified using a destination MAC address of 01:80:C2:xx:xx:xx. 15. In the Destination MAC Mask field, specify the destination MAC address mask that must be compared against the information in an Ethernet frame. The valid format is xx:xx:xx:xx:xx:xx. The BPDU keyword can be specified using a destination MAC mask of 00:00:00:ff:ff:ff. 16. From the EtherType Key menu, select the EtherType value that must be compared against the information in an Ethernet frame. The valid values are as follows: • Appletalk • ARP • IBM SNA • IPv4 • IPv6 Manage Device Security 340