Netgear GS418TPP User Manual - Page 39
View USB Device Information, To display the USB device information, Password
View all Netgear GS418TPP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
ProSAFE 8-Port or 16-Port Gigabit Smart Managed Switch Model GS418TPP, GS510TLP, and GS510TPP View USB Device Information Note: Model GS418TPP supports a USB port but models GS510TLP and GS510TPP do not. Therefore, the information in this section refers to model GS418TPP only. You can display the USB device status, memory statistics, and directory details. The limitations for the USB device supported on the switch are as follows: • The USB disk must comply with the USB 2.0 standard. • The USB disk must be file type FAT32 or VFAT. File type NTFS is not supported. To display the USB device information: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired connection to connect your computer to the network, or connect directly to a switch that is off-network using an Ethernet cable. 2. Launch a web browser. 3. In the address field of your web browser, enter the IP address of the switch. If you do not know the IP address of the switch, see Change the Default IP Address of the Switch on page 11. The login window opens. 4. Enter the switch's password in the Password field. The default password is password. The System Information page displays. 5. Select System > Management > USB Device Information. Configure System Information 39