Netgear GS418TPP User Manual - Page 132

ProSAFE 8-Port or 16-Port Gigabit Smart Managed Switch Model GS418TPP, GS510TLP, and GS510TPP You can enter any string of up to 15 alphanumeric characters. A valid name must be specified for you to create the LAG. 8. In the Ports table, click each port that you want to include as a member of the selected LAG. A selected port is displayed by a check mark. 9. Click the Apply button. The updated configuration is sent to the switch. Configuration changes take effect immediately. Set the LACP System Priority The LACP configuration page is used to set the LACP system priority.  To configure LACP: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired connection to connect your computer to the network, or connect directly to a switch that is off-network using an Ethernet cable. 2. Launch a web browser. 3. In the address field of your web browser, enter the IP address of the switch. If you do not know the IP address of the switch, see Change the Default IP Address of the Switch on page 11. The login window opens. 4. Enter the switch's password in the Password field. The default password is password. The System Information page displays. 5. Select Switching> LAG > Advanced > LACP Configuration. 6. In the LACP System Priority field, specify the device's link aggregation priority relative to the devices at the other ends of the links on which link aggregation is enabled. Configure Switching 132