Netgear GS418TPP User Manual - Page 33
View the Temperature Sensor Information, Update, To view temperature information, Password
View all Netgear GS418TPP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
ProSAFE 8-Port or 16-Port Gigabit Smart Managed Switch Model GS418TPP, GS510TLP, and GS510TPP View the Temperature Sensor Information Note: The temperature sensor information is available for model GS418TPP only. You can view the current temperature of the temperature sensors. The temperature is instant and can be updated with the latest information about the switch when you click the Update button. The maximum temperature of the temperature sensors depends on the actual hardware. To view temperature information: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired connection to connect your computer to the network, or connect directly to a switch that is off-network using an Ethernet cable. 2. Launch a web browser. 3. In the address field of your web browser, enter the IP address of the switch. If you do not know the IP address of the switch, see Change the Default IP Address of the Switch on page 11. The login window opens. 4. Enter the switch's password in the Password field. The default password is password. The System Information page displays. 5. Scroll down to the Temperature Sensors section. 6. To refresh the page, click the Update button. The following table describes the nonconfigurable Temperature Sensors information. Table 5. Temperature Sensors information Field Sensor Description Temp(C) State Max Temp (C) Description The temperature sensor for the given unit. The description of the temperature sensor. The temperature of the specified unit in degrees Centigrade. The unit temperature state. The maximum temperature value of CPU and MACs. Once the blade exceeds this limit, the chassis shuts down the power for this blade. Configure System Information 33