Netgear GS418TPP User Manual - Page 362

ProSAFE 8-Port or 16-Port Gigabit Smart Managed Switch Model GS418TPP, GS510TLP, and GS510TPP 8. Configure the following match criteria for the rule: • Action. Select the ACL forwarding action by selecting one of the following radio buttons: - Permit. Forward packets that meet the ACL criteria. - Deny. Drop packets that meet the ACL criteria. • Egress Queue. If you select the Permit radio button, select the hardware egress queue identifier that is used to handle all packets matching this IPv6 ACL rule. The range of queue IDs is 0 to 7. • Logging. If you select the Deny radio button, you can enable logging for the ACL by selecting the Enable radio button. (Logging is subject to resource availability in the device.) If the access list trap flag is also enabled, periodic traps are generated, indicating the number of times this rule was evoked during the report interval. A fixed five-minute report interval is used for the switch. A trap is not issued if the ACL rule hit count is zero for the current interval. • Match Every. Select whether all packet must match the selected IPv6 ACL rule: - Disable. Not all packets need to match the selected IPv6 ACL rule. You can configure other match criteria on the page. - Enable. All packets must match the selected IPv6 ACL rule and are either permitted or denied. In this case, you cannot configure other match criteria on the page. • Protocol Type. Specify the IPv6 protocol type in one of the following ways: - From the Protocol Type menu, select IPv6, ICMPv6, TCP, or UDP. - From the Protocol Type menu, select Other, and in the associated field, specify an integer ranging from 0 to 255. This number represents the IPv6 protocol. Manage Device Security 362