Netgear GS418TPP User Manual - Page 86
View the Supported MIBs, Link Up/Down, Spanning Tree, Apply, Password
View all Netgear GS418TPP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
ProSAFE 8-Port or 16-Port Gigabit Smart Managed Switch Model GS418TPP, GS510TLP, and GS510TPP • Link Up/Down. When enabled, SNMP traps are sent when the administrative or operational state of a physical or logical link changes. The default is Enable. • Spanning Tree. When enabled, SNMP traps are sent when various spanning tree events occur. The default is Enable. • ACL. When enabled, SNMP traps are sent when a packet matches a configured ACL rule that includes ACL logging. The default is Disable. 7. Click the Apply button. The updated configuration is sent to the switch. Configuration changes take effect immediately. View the Supported MIBs This page displays a list of all MIBs supported by the switch. To view the supported MIBs: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired connection to connect your computer to the network, or connect directly to a switch that is off-network using an Ethernet cable. 2. Launch a web browser. 3. In the address field of your web browser, enter the IP address of the switch. If you do not know the IP address of the switch, see Change the Default IP Address of the Switch on page 11. The login window opens. 4. Enter the switch's password in the Password field. The default password is password. The System Information page displays. 5. Select System > SNMP > SNMP V1/V2 > Supported MIBs. Configure System Information 86