Netgear GS418TPP User Manual - Page 323

ProSAFE 8-Port or 16-Port Gigabit Smart Managed Switch Model GS418TPP, GS510TLP, and GS510TPP • Max Static MAC Address. Specify the maximum number of statically locked MAC addresses on the selected interfaces. • Enable Violation Shutdown. Enable or disable shutdown of the selected interfaces if a packet with a disallowed MAC address is received. The default value is No, which means that the option is disabled. • Enable Violation Traps. Enable or disable the sending of new violation traps if a packet with a disallowed MAC address is received. The default value is No, which means that the option is disabled. 8. Click the Apply button. The updated configuration is sent to the switch. Configuration changes take effect immediately. View Learned MAC Addresses and Convert Them to Static MAC Addresses You can convert a dynamically learned MAC address to a statically locked address.  To view learned MAC addresses for an individual interface or LAG and convert these MAC addresses to static MAC addresses: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired connection to connect your computer to the network, or connect directly to a switch that is off-network using an Ethernet cable. 2. Launch a web browser. 3. In the address field of your web browser, enter the IP address of the switch. If you do not know the IP address of the switch, see Change the Default IP Address of the Switch on page 11. The login window opens. 4. Enter the switch's password in the Password field. The default password is password. The System Information page displays. 5. Select Security > Traffic Control > Port Security > Port Security Configuration. The Port Security Configuration page displays. 6. Make sure that port security is globally enabled. For more information, see Configure the Global Port Security Mode on page 320. 7. Select Security > Traffic Control > Port Security > Interface Configuration. The Interface Configuration page displays. 8. Make sure that port security is enabled for the individual interface for which you want to view the dynamically learned MAC addresses. For more information, see Configure a Port Security Interface on page 321. Manage Device Security 323